Meta Quest 3 can be very thin

The Meta Quest 3 could have a very slim design

Photo: Marcus Kane/Hyperware

Der Artikel kann nur mit aktiviertem JavaScript dargestellt werden. Bitte aktiviere JavaScript in deinem Browser und lade die Seite neu.

January 22nd update:

3D artist and industrial designer Marcus Kane aka Hyperware has produced professional renders of the leaked prototype showing more detail.

Original article from January 19, 2023:

A 3D model of the supposed Meta Quest 3 prototype shows the potential design for a virtual reality headset.

later this year, The successor to Meta Quest 2 will be released. This much has been confirmed by Meta. Last fall, insider hardware analyst Brad Lynch posted schematics of a prototype VR headset, purportedly showing the design of the Meta Quest 3.

YouTuber leaked meta graphics Quest Pro a few months ago, which was later proven accurate. There’s a good chance that something is leaking. However, Lynch stresses that small details can still change.

Zwei CAD-Bauplane zeigen Meta Quest 3 von vorne und seitlich gedreht.

Leaked CAD schematics show Meta Quest 3. | Photo: SadlyitsBradley

The Stinson prototype has been leaked as a 3D model

3D artist Alvin Suen has created a 3D model based on CAD schematics of a supposed prototype for Quest 3. If you’re reading this article on a smartphone, you can View the 3D view from all sides by touching it.

With the Sketchfab app, it is also possible to see the headset in your physical environment via augmented reality. Meta Quest 2 It also allows you to view your VR headset in VR in the Meta Quest Browser, or with the Figmin XR app.

What immediately catches the eye are the three elongated Bumps on the front of the virtual reality headset. According to the schematics, there is a pair of black and white cameras, RBG cameras (left and right, respectively) as well as a depth sensor (in the center). These allow for spatial tracking, color crossing over, and improved hand tracking. The elaborate sensor architecture indicates that the focus of Meta devices is on mixed reality.

CAD diagram showing the interface of the Meta Quest 3 with transit sensor technology.

This image shows the technology behind the front cover. | Photo: SadlyitsBradley

It is also very noticeable The thinnest profile of the case compared to Meta Quest 2 (Review). It’s good that Meta used Pancake lenses like they did with them Meta Quest Pro (Review)allowing for a slimmer form factor.

Ein Rendering des Stinson-CAD-Leaks, das das von oben zeigt earphone.

The Meta Quest 3 should catch up to the Pico 4 in terms of form factor. | Photo: Alvin Swain

The White Touch Pro controllers look good

Suen has added new Meta Touch Pro controllers to the 3D model of the headset, but in white to match Meta Quest 3. The new VR controllers are included with Meta Quest Pro, but are also compatible with Meta Quest 2 and have been finalized. Available for purchase separately Since December. The Touch Pro controllers track themselves so you don’t need to Spam Tracking Loops The usual touchscreen controls.

It’s highly unlikely that the Meta Quest 3 will ship with Touch Pro controllers, given its hefty $300 price tag. meta Quest 3 is supposed to cost between $300 and $500According to Mark Zuckerberg. However, it fits nicely with the new white VR headset, as the 3D model shows. We assume it will also be compatible with Meta Quest 3.

General view about Facts and rumors about Meta Quest 3 It can be found behind the link.

Leave a Comment